ME 1000 Smart E-BIKE Light
-Sam A . ✔ Verified Purchase ★ ★ ★ ★ ★
Features at a Glance:
✔ Max Lumen: 1000 LM
✔ Max Throw: 140 m
✔ E-BIKE Compatible: 6-12V
✔ DRL: Support
✔ Anti-Glare: Support
✔ Brightness Sensor: Support
✔ Mounting System: One-side holder
✔ Waterproof: IPX6
ME 1000, designed specifically for e-bike riders, is connected and powered directly by the output of the e-bike motor (Shimano, Bosch, Brose, Yamaha, Giant, BaFang).
- ME 1000
- ME 1000 +Shimano Cable
- ME 1000+Bosch Cable
- ME 1000+Brose Cable
- ME 1000 +Yamaha Cable
- ME 1000 +Giant Cable
- ME 1000+ BaFang Cable
- ME 1000 + Bosch BES3 Cable
THE PIONEER
ME 1000 Smart
E-BIKE Light
1000 LM | 140 M | IPX 6 | -20°C / 40°C
HOW TO USE?
LIGHT MODES
| Mode | HIGH | MID | LOW | FLASH | DRL |
|---|---|---|---|---|---|
| LUMENS | 1000 | 500 | 350 | 0-350 | 15 |
Swept Through The Darkness
After years of research and development, ME 1000'sfront lens has been fine-tuned to make the most of its extremely power-efficient LED, the two are perfectly matched to provide a maximum output of 1000lumens, carpeting the entire frontal section with no sharp edge nor hot spots.
Daytime Running Light
During the daytime, the always-on Daytime Running Light significantly enhances the rider's road presence at very little power consumption.
Intelligent Light Sensor
Due to the high output, we have taken the internal heat management system up a notch. Much of the MJ-906S is covered by efficient heat dissipation fins to help with fast cooling.
Design For Safety
In an effort to maximize the versatile purposes of the ME 1000 we have added side lighting and anti-glare to fully round out ME 1000's active and passive safety features under all weather and road conditions.
6V-12V E-bike Compatible
ME 1000 E-bike Light can be hooked up to the light port of your E-bike battery. Can automatically adapt its power to the supply voltage and work with most E-bike systems from 6-12V, like Bosch, Shimano, Brose, and Yamaha.
*Connection cable to e-bike drive unit not included, please purchase separately.
Intelligent Thermal Management
The built-in smart thermal control system and the seamless one-piece aluminum housing keep the ME1000 operating temperature at optimal levels. protecting internal circuits and maintaining maximum output. E-bike Light is covered by efficient heat dissipation fins to help with fast cooling.
Firm As A Rock
With its one-prong aluminum mount, the ME 1000 can be installed on the handlebar without removing grip shifters or brake levers, providing unprecedented stability, though only compatible with 31.8mm ~ 35mm handlebars.
Technical Specifications
| Specifications | Parameter |
|---|---|
| Max Lumen | 1000 LM |
| LED | Luminus SST-40 |
| Beam Angle | 27° |
| Max Throw | 140 m |
| E-BIKE Compatible | 6-12V |
| DRL | Support |
| Anti-Glare | Support |
| Brightness Sensor | Support |
| Suitable Handlebar Range | 31.8mm - 35mm |
| Beam Intensity | 4900 CD |
| Waterproof Rate | IPX6 |
| Weight | 92g / 3.24 oz |
| Dimensions | 40*36*36 mm / 1.57*1.41*1.41 in |
| Material | Aluminum |
| Mounting System | One-side holder |
E-Bike Lights Compatibility
ME1000 can be powered directly from the light output of the motor, just like our other e-bike lights.
Click the following link to know whether the ME1000 is compatible with your motor or not.
What's in the Box?
ME 1000 E-bike Light x 1
Silicone Pad x 2
3mm hex x 1
User Manual x 1(Manual Download Here)